Car Directions

FROM THE SOUTH
Use any of the following:
Saw Mill River Parkway northbound: Go 1/4 mile beyond Exit 25 which is marked "Route 9A, Hawthorne.) Use direct entrance into Rosedale.

New York State Thruway (Interstate 87): Exit 7A and take Saw Mill River Parkway northbound to 1/4 mile past Exit 25 marked "Route 9A, Hawthorne." Use direct entrance into Rosedale.

Route 9A: 3 miles north of Elmsford. Rosedale entrance is on the left.

Sprain Brook Parkway: To exit marked "Route 100C, Eastview." Turn left on 100C for one mile. Turn right on Route 9A northbound for 1-1/2 miles, Rosedale entrance on left.

FROM THE EAST
Use Merritt Parkway, Connecticut Turnpike or New England Thruway (Interstate 95) to Cross Westchester Expressway (Interstate 287) West to Exit 2 (Route 9A, Elmsford), turn right (north) on Route 9A, 3 miles to Rosedale, entrance on left.

FROM THE WEST
Use New York State Thruway (Interstate 87), over the Tappan Zee Bridge to Exit 8A, keep to right – signs for Route 119 and Saw Mill Parkway North. Take the Saw Mill Parkway North for 3 miles and continue ¼ mile beyond exit 25, which is marked “Route 9A Hawthorne” to Rosedale direct entrance on right.

FROM THE NORTH
Use any of the following:
Route 9A south of Hawthorne 1 mile to Rosedale entrance on the right.

Taconic Parkway south to exit marked "Route 100, Millwood." Take Route 100 south 2.7 miles to Route 9A at Briarcliff. Follow Route 9A south 4.3 miles to Rosedale entrance on right.

Saw Mill River Parkway southbound past the nursery 1 mile to Eastview exit. Turn left under the parkway and left again northbound on Parkway 1 mile to 1/4 mile beyond Exit 25 marked "Route 9A, Hawthorne." Use direct entrance into Rosedale.